Outdoor Fire Designs : RSS All Products Feed

Fiji Aluminum Gas Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 19:58:39 -0600

Specifications
Torch Head Size: 5" W X 16-1/4" H
Pole Height: 60"
Total Height with Pole: 76-1/4"
Fuel: 1-Lb. LP Gas (not included)
Regulator: See Option Below
Materials: Aluminum

Now you can add the romance of fire to your outdoor setting, easily. The FIJI torches are simple to assemble and install. The flame height is adjustable. They will burn for hours on just a single 1-lb lp, gas cylinder which can be found at all major hardware and sporting goods stores. No more dangerous liquids to spill and refill.

Overall height is approximately 76-1/4 inches tall. The head and post are manufactured in a durable and attractive aluminum finish to last for years and compliment any outdoor setting. The post breaks down into three pieces for easy storage.

Gas Light-Style Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 19:54:23 -0600

Permanent Mount

Specifications
Torch Head Size: 9" W X 20" H
Pole Height: 82"
Total Height with Pole: 91"
Fuel: Natural Gas or Liquid Propane
Regulator: See Option Below
Materials: Powder-Coated Steel

The Gas Light-Style Gas Torch Light provides a soft, golden glow enhancing any outdoor setting. NO filling of oil like conventional tiki torches, just the soothing, romantic light from an open flame.

The Gas Light-Style permanent gas tiki torch includes an 82" pole. The torch head and pole features a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows a wide variety of flame heights and widths.

The Gas-Light style head is 9" wide by 20" high. The Gas Lite Style Head CANNOT be purchased with an ignitor; however, it can be lit with any flame source.

If you are using Lp Gas (propane), a regulator is required.

Patio Lights are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Torch.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour

Curled Finger-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 19:53:58 -0600

Permanent Mount

Specifications
Torch Head Size: 6" W X 14" H
Pole Height: 82"
Total Height with Pole: 96"
Fuel: Liquid Propane Or Natural Gas
Regulator: See Option Below
Materials: Powder-Coated Steel

The Curled Finger-Style Gas Torch Light provides a soft, golden glow enhancing any outdoor setting. No more flame going out because the tiki torch is out of citrinella oil, just the soothing, romantic light from an open flame.

The Curled Finger-Style permanent mount Torch includes an 82" pole. The torch head and pole features a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame adjusting valve allows a wide variety of flame heights and widths.

The Curled Finger-style head is 6" wide by 14" high.

If using Lp gas (propane), a regulator is required.

Patio Lights are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Light.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour

Copper Cone-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 19:53:32 -0600

Liquid Propane Or Natural Gas

Specifications
Torch Head Size: 7-3/4" W X 14" H
Pole Height: 82"
Total Height with Pole: 96"
Fuel: Liquid Propane Or Natural Gas
Regulator: See Option Below
Materials: Powder-Coated Steel

The Copper Cone-Style Gas Torch Light provides a soft, golden glow, enhancing any outdoor setting. No filling citronella oil like conventional tiki torches, just the soothing, romantic light from an open flame.

The Copper Cone-Style Permanent gas Tiki Torch includes an 82" pole. The torch pole and parts of the torch head feature a durable, yet lightweight, ALL steel construction and are powder-coated for a long lasting, durable finish. A flame adjusting valve allows a wide variety of flame heights and widths.

The Copper Cone-style head is 7-3/4" wide by 14" high.

*If using Lp Gas (Propane), a regulator is required.

Patio Lights are rated up to 49,000 BTU/hr. Please allow a minimum 36" of clearance on all sides of a Patio Torch.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour

Black Cone-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 19:53:11 -0600

Liquid Propane Or Natural Gas

Specifications
Torch Head Size: 9" W X 18" H
Pole Height: 82"
Total Height with Pole: 100"
Fuel: Liquid Propane Or Natural Gas
Regulator: See Option Below
Materials: Powder-Coated Steel

The Black Cone-Style Torch Light provides a soft, golden glow, enhancing any outdoor setting. NO oily mess or fragile mantels, just the soothing, romantic light from an open flame.

The Black Cone-Style Gas Tiki Torch includes an 82" pole. The torch head and pole features a durable, yet lightweight all-steel construction and are powder-coated for a long lasting, durable finish. A flame-adjusting valve allows a wide variety of flame height and width.

The Black Cone-style head is 9" wide by 18" high (add additional 3" for an igniter). It can be purchased with an ignitor, if you prefer the safety and convenience of having a simple Electronic Igniter

If using Lp gas (propane), a regulator is required.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour

Copper Square Fire-Water Pot

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:43:27 -0600

This beautiful square Fire-Water pot pictured in Smooth Copper with a standard scupper lip flowing water into a outdoor hot tub. This pot makes a great display with our remote control fire module.

This pot is available in Copper and Stainless Steel in several sizes. The above pot is designed with water flow over 1 side in a standard scupper lip design. All pots can have water flow over 1,2,3, or all sides of the bottom pot in a standard or seamless lip. We have several different sizes available. Please give us a call at 1-866-601-8842 for price and sizing.

Stainless Steel Square Fire/Water Pot

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:38:53 -0600

Round Bronze Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:37:12 -0600

Square Copper Fire Pot

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:34:58 -0600

Round Copper Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:33:57 -0600

Fire on Water Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:03:17 -0600

For those of you wanting Fire on Water in a complete kit, here you go. Everything you need for your own Fire on Water Feature. This will definitely be the center piece of any outdoor patio or pool area. Please call for availablity and pricing 866-601-8842.

Remote Control Fire Module

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 18:01:12 -0600

Remote Control Fire Module Kit
When size and reliability matters then we have the solution. Our remote control system is the smallest most reliable remote control module on the market. With our patent pending igniter and relighting system you can rest assure you will enjoy hours of worry free fire. Our remote control system also has a built in gas valve and an automatic safety shut off regulator. With the push of a button watch your fire features come to life. The ultimate remote control fire feature module!

Kit Includes:
� RC Module
� Heat Shield
� 24v Transformer
� Parts Kit
� Installation Instructions

Remote Control Fire Pits
Firepits and torches are becoming increasingly popular in backyard settings. Everything is Remote Control today - why not use Remote Control to turn on your fire features as well?

Check out our Remote Control fire module in the Fire Feature Gallery.

Small Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:20:35 -0600

1/4 Small lava rock is a good filler to use for a base layer under fire glass or as stand alone media in any fire feature. We do not recomend using sand as a filler because it could retain water and cause damage to the burner system.

Medium Black Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:15:28 -0600

1/2 Medium fire rock is a good way to fill a large amount of space in a firepit. We do not recomend using sand as a filler because it could retain water and cause damage to the burner system.

Large Black Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:15:12 -0600

1" Large fire rock is a good way to fill a large amount of space in a firepit. We do not recomend using sand as a filler because it could retain water and cause damage to the burner system. This is one 10 pound bag of Fire rock.

Mixed Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:14:51 -0600

Time tested, Lava Rock is proven to improve combustion efficiency, while maintaining a nice look for any fire pit. The size of each rock varies from 1"-2" and is a combination of black and brown colors.
Each container is 1/2 cu. ft. and weighs about 25lbs

Medium Multi-Color Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:14:28 -0600

Looking for a unique lava rock other than the standard lava rocks made for barbeques? These Medium sized Multi-Color Lava Rocks might be just what you are looking for. Each rock is 2"-4" in size and comes in a 1 cu ft bag.

Large Multi-Color Lava Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:14:15 -0600

These hard to find large pieces of Multi-Color Lava rock look great by themselves or mixed in with smaller lava rock, stones, or fireglass. Each stone is 5"-6" and comes in 1 cu ft bags.

Multi-Color Ceramic Fiber River Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:02:29 -0600

Looking for something different than Lava rock or Fire Glass... our new river rock series might be just what you are looking for. These imitation stones are made of light weight ceramic fiber, gel cast and designed to take on the outdoor elements. Each set comes with a 84 piece assortment of large and small stones. (large pieces = 4-1/2", small pieces = 2-1/2") One set is 1/2" cu. ft. Combination of light & dark brown, gray, and black.

Black Ceramic Fiber River Rock

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 13 Nov 2009 14:01:55 -0600

42" High Capacity Rund Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:06:27 -0600

36" High Capacity Round Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:06:06 -0600

36" Round Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:05:10 -0600

30" Round Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:04:21 -0600

24" Round Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:03:55 -0600

18" Round Flat Burner Pan

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 01:03:27 -0600

High Capacity Angled Chrome Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:24:47 -0600

Angled Chrome 3/4" High Capacity key valve kit. Kit comes with angled 3/4" 90 degree ball valve with polished chrome flange and key

Angled Chrome Key Valve KIt

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:24:30 -0600

Angled Chrome 1/2" key valve kit. Kit comes with angled 90 degree 1/2" ball valve with polished chrome flange and key

High Capacity Angled Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:24:16 -0600

Angled High Capacity Brass 3/4" key valve kit. Kit comes with angled 3/4" ball valve with polished brass flange and key

Angled Brass Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:24:00 -0600

Angled Brass 1/2" key valve kit. Kit comes with angled 1/2" ball valve with polished brass flange and key

High Capacity Straight Chrome Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:23:42 -0600

Straight High Capacity Chrome 3/4" key valve kit. Kit comes with straight High Capacity 3/4" ball valve with polished chrome flange and key

Straight Chrome Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:23:27 -0600

Straight Chrome 1/2" key valve kit. Kit comes with straight 1/2" ball valve with polished chrome flange and key

High Capacity Straight Brass Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:23:11 -0600

Straight Brass 3/4" High Capacity key valve kit. Kit comes with straight 3/4" High Capacity ball valve with polished brass flange and key.

Straight Brass Key Valve Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 05 Nov 2009 00:22:57 -0600

Straight Brass 1/2" key valve kit. Kit comes with straight 1/2" ball valve with polished brass flange and key.

Custom Fire Features

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 13:20:48 -0500

Custom Fire Features are our specialty. If you can imagine it, we can put Automated Remote Control Fire to it. Below are just a couple examples of some of the possibilities in remote control fire. Put your imagination to work and we will help you create your own one of a kind fire feature. Give us a call at 1-866-601-8842.

Propane Tank Cover

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:14:57 -0500

These propane tank covers will cover any 20 lb. tank and can be used in several different locations. Our black gas tank cover goes with our portable Big Kahuna Gas Torch. By covering the attached propane tank, you will greatly enhance the look of your torch. These covers can also be used for gas grills, RV use, and anywhere that an average-size propane tank is in use.

Fin-Style Portable GasTiki Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:05:33 -0500

Portable Outdoor Lighting

Specifications
Torch Head Size: 12" W X 17" H
Pole Height: 82"
Total Height with Pole: 99"
Fuel: Liquid Propane
Regulator: included
Materials: Powder-Coated Steel

Portable gas tiki torch lights assemble in just minutes. Simply attach a 20 lb. propane cylinder (not included) and enjoy hours of natural, open flame outdoor lighting.

This portable patio light includes a sturdy, two-wheel cart which holds the tank and makes relocating a snap. An Lp gas regulator is included with the portable model.

The torch head and pole feature a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows maximum flexibility.

The Fin-style head is 12" wide by 17" high. It can also be purchased with ignitor, if you prefer the safety and convenience of having a simple Push-Button Electronic Igniter

A Gas Tank Cover can be purchased to cover the Lp Gas cylinder needed to operate this torch. This will greatly enhance the look of your portable torch.

Patio Torches are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Torch.

Black Cone-Style Portable Gas Tiki Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:04:42 -0500

Portable Outdoor Lighting

Specifications
Torch Head Size: 9" W X 18" H
Pole Height: 82"
Total Height with Pole: 100"
Fuel: Lp Gas
Regulator: included
Materials: Powder-Coated Steel

Portable gas tiki torch lights assemble in just minutes. Simply attach a 20 lb. propane cylinder (not included) and enjoy hours of natural, open flame outdoor lighting.

This portable patio light includes a sturdy, two-wheel cart which holds the tank and makes relocating a snap. An Lp gas regulator is included with the portable model.

The torch head and pole feature a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows maximum flexibility.

The Cone Style Head is 9" wide by 18" high. It can also be purchased with ignitor, if you prefer the safety and convenience of having a simple Push-Button Electronic Igniter

A Gas Tank Cover can be purchased to cover the Lp Gas cylinder needed to operate this torch. This will greatly enhance the look of your portable torch.

Patio Torches are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Torch.

Curled Finger-Style Portable Gas Tiki Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:03:37 -0500

Portable Patio Lighting

Specifications
Torch Head Size: 6" W X 14" H
Pole Height: 82"
Total Height with Pole: 96"
Fuel: Lp Gas
Regulator: included
Materials: Powder-Coated Steel

Portable gas tiki torch lights assemble in just minutes. Simply attach a 20 lb. propane cylinder (not included) and enjoy hours of natural, open flame outdoor lighting.

This portable patio light includes a sturdy, two-wheel cart which holds the tank and makes relocating a snap. An Lp gas regulator is included with the portable model.

The torch head and pole feature a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows maximum flexibility.

The Curled Finger Style Head is 6" wide by 14" high.

A Gas Tank Cover can be purchased to cover the Lp Gas cylinder needed to operate this torch. This will greatly enhance the look of your portable torch.

Patio Torches are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Torch.

Gas Light-Style Portable TikiTorch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:01:53 -0500

Portable Outdoor Lighting

Specifications
Torch Head Size: 9" W X 20" H
Pole Height: 82"
Total Height with Pole: 102"
Fuel: Lp Gas
Regulator: included
Materials: Powder-Coated Steel

Portable gas tiki torch lights assemble in just minutes. Simply attach a 20 lb. propane cylinder (not included) and enjoy hours of natural, open flame outdoor lighting.

This portable patio light includes a sturdy, two-wheel cart which holds the tank and makes relocating a snap. An Lp gas regulator is included with the portable model.

The torch head and pole feature a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows maximum flexibility.

The Gas Light style head is 9" wide by 20" high. The Gas Light style head CANNOT be purchased with ignitor, however can be lit with any flame source.

A Gas Tank Cover can be purchased to cover the Lp gas cylinder needed to operate this torch. This will greatly enhance the look of your portable torch.

Gas patio light torches are rated up to 49,000 BTU/hr. Please, allow a minimum of 36" of clearance on all sides of a Patio Light Torch.

Copper Cone-Style Portable Gas Tiki Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 29 Oct 2009 00:00:19 -0500

Portable gas tiki torch lights assemble in just minutes. Simply attach a 20 lb. propane cylinder (not included) and enjoy hours of natural, open flame outdoor lighting.

This portable patio light includes a sturdy, two-wheel cart which holds the tank and makes relocating a snap. An Lp gas regulator is included with the portable model.

The torch head and pole feature a durable, yet lightweight all-steel construction and are powder-coated for a long-lasting, durable finish. A flame-adjusting valve allows maximum flexibility.

The Copper Cone Style Head is 7-3/4" wide by 14" high.

A Gas Tank Cover can be purchased to cover the Lp Gas cylinder needed to operate this torch. This will greatly enhance the look of your portable torch.

Patio Torches are rated up to 49,000 BTU/hr. Please, allow a minimum 36" of clearance on all sides of a Patio Torch.

Malumai-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Wed, 28 Oct 2009 23:58:54 -0500

Permanent Mount

Specifications
Torch Head Size: 12-1/2" W X 8-1/2" H
Pole Height: 120"
Total Height with Pole: 132-1/2"
Fuel: Natural Gas
Regulator: See Option Below
Materials: Cast Aluminum with Solid Brass Burner

Malumai-style gas tiki torches add warmth and enjoyment to any outdoor patio or sidewalk cafe! The Malumai measures 12-1/2" wide by 8-1/2" in high. This torch is constructed of cast aluminum with a solid brass burner. The torch also includes a UL-listed control valve for easy lighting and flame control. Please note that the minimum installation height is 76".

The Malumai-style can be purchased with an igniter, if you prefer the safety and convenience of an Electronic Remote Control Ignition System

Also included is an 18-gauge, galvanized steel black pole. The pole is 10' tall by 3" in diameter. It is painted inside and out for a final coat of protection. The pole includes a ladder rest with decorative, gold balls, which can be removed. The torch pole is made to conform with the torch head for easy installation.

The Malumai-style gas tiki torch is made to be used with natural gas as a fuel source. Outdor Fire Designs does not recommend the use of Lp gas (propane), due to problems during ignition. A gas-supply line of 3/8" O.D. copper is required for this model, but must be purchased by you from your local hardware store. The length of the supply line will depend upon your preferred height of installation.

Note: All installation procedures should conform to local plumbing codes.

Tulip-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Wed, 28 Oct 2009 23:57:15 -0500

Permanent Mount

Specifications
Torch Head Size: 10-1/2" W X 11" H
Pole Height: 120"
Total Height with Pole: 130-1/2"
Fuel: Natural Gas or Propane
Regulator: See Option Below
Materials: Cast Aluminum With Solid Brass Burner

Your roasting pig will sizzle in the glow of these flaming torches! The Tulip head is 10-1/2" wide by 11" in high. This torch is constructed of cast aluminum with a solid brass burner.

The torch also includes an UL-listed control valve for easy lighting and flame control. Please note that the minimum installation height is 76 inches.

The Tulip style can also be purchased with igniter , if you prefer the safety and convenience of an Electronic Remote Control Ignition System

Also included is an 18-gauge, galvanized steel black pole. The pole is 10 feet tall by 3 inches in diameter. It is painted inside and out for a final coat of protection. The pole includes a ladder rest with decorative, gold balls, which can be removed. The torch pole is made to conform with the torch head for easy installation.

The Tulip-style tiki torch is made to be used with Natural Gas or Propane as a fuel source. A gas-supply line of 1/4 inch O.D. copper is required for this model, but must be purchased by you from your local hardware store. The length of the supply line will depend upon your preferred height of installation.

Note: All installation procedures should conform to local plumbing codes.

Gulf-Style Gas Torch Permanent Mount

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Wed, 28 Oct 2009 23:56:56 -0500

Permanent Mount

Specifications
Torch Head Size: 13" W X 7" H
Pole Height: 120"
Total Height with Pole: 127"
Fuel: Natural Gas or Propane
Regulator: See Option Below
Materials: Cast Aluminum with Solid Brass Burner

The Gulf-style tiki torch is 13" inches wide by 7 inches high. This torch is constructed of cast aluminum with a solid brass burner. The torch also includes an UL-listed control valve for easy lighting and flame control. Please note that the minimum installation height is 76".

The Gulf style comes with a bag of lava rocks.

The Gulf style can be purchased with an igniter, if you prefer the safety and convenience of an Electronic Remote Control Ignition System

Also included is an 18-gauge, galvanized steel black pole. The pole is 10 feet tall by 3 inches in diameter. It is painted inside and out for a final coat of protection. The pole includes a ladder rest with decorative, gold balls, which can be removed. The Torch Pole is made to conform with the torch head for easy installation.

The Gulf-style tiki torch is made to be used with natural gas or propane as a fuel source. A gas-supply line of 1/4" O.D. copper is required for this model, but must be purchased by you from your local hardware store. The length of the supply line will depend upon your preferred height of installation.

Note: All installation procedures should conform to local plumbing codes.

Fin-Style Gas Tiki Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Wed, 28 Oct 2009 23:48:14 -0500

Specifications
Torch Head Size: 12" X 17"
Pole Height: 82"
Total Height with Pole: 94"
Fuel: Natural Gas Or Liquid Propane
Regulator: See Option Below
Materials: Powder-Coated Steel

The Fin-Style Torch Light provides a soft, golden glow, enhancing any outdoor setting. NO oily mess or fragile mantels, just the soothing, romantic light from an open flame.

The Fin-Style permanent gas Tiki Torch includes an 82" pole. The torch head and pole feature a durable, yet lightweight, all steel construction and are powder coated for a long lasting, durable finish. A flame adjusting valve allows a wide variety of flame length and width.

The Fin Style Head is 12" wide by 17" high (add additional 3" for an igniter). It can also be purchased with ignitor, if you prefer the safety and convenience of having a simple, Push-Button Electronic Igniter

*If using Lp gas (propane), a regulator is required. Patio Lights are rated up to 49,000 BTU/hr. Please allow a minimum 36" of clearance on all sides of a patio light.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour

25" Galvanized Installation Collar

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:38:32 -0500

25" Installation Collar- Galvanized. Inside Diameter measures 26; Outside Diameter measures 32.

31" Galvanized Installation Collar

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:38:00 -0500

31" Installation Collar- Galvanized. Inside Diameter measures 32; Outside Diameter measures 38.

37" Galvanized Installation Collar

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:37:37 -0500

37" Installation Collar - Galvanized. Inside Diameter measures 38; Outside Diameter measures 44.

19" Galvanized Installation Collar

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:34:26 -0500

This 19" galvanized Collar has an inside dimension of 20" and outside dimension of 26"

FPSLPK150 LP CONVERSION

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:01:38 -0500

150,000 BTU Lp Conversion Air Mixer. For use with fire pit kits with 1/2" threads up to 150,000 BTU's. Designed to lean out LP gas to eliminate the black suit associated with LP fire features.

FPSLPK90 LP CONVERSION

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 23:00:45 -0500

90,000 BTU LP conversion Air Mixer. This is a must for LP fire rings and burner kits with 1/2" threads up to 90,000BTU's. This will eliminate the black suit associated with Propane Flames.

FPSLPK300 LP CONVERSION

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 22:59:50 -0500

300,000 BTU LP Conversion Air Mixer. For use with fire pit kits up to 300,000 BTU and 3/4" threads.

54" Octagon Fire Pit Enclosure

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 22:44:04 -0500

54" Octagon Fire Pit Enclosure. Ready to house a 25" fire pan. Constructed of sturdy 22 guage galvanized steel material, welded frame and a 1/2" Hardboard shell. Complete with venting. Simply run gas supply, automated fire module or manual light fire kit, apply mortar/stone to match your decor.

54" Round Fire Pit Enclosure

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 22:41:08 -0500

54" Round Fire Pit Enclosure. Ready to house a 25" fire pan. Constructed of sturdy 22 guage galvanized steel material, welded frame and a 1/2" Hardboard shell. Complete with venting. Simply run gas supply, apply mortar/stone to match your decor and a automated or manual light fire pit kit and your done.

36" Stainless Steel Trough Burner

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 22:29:42 -0500

36" Stainless steel Trough Burner. Comes with Stainless Steel T-Burner, trough is 5.3" wide with 1.3" lip.

24" Stainless Steel Trough Burner

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 22:29:29 -0500

24" Stainless Steel Trough Burner. 5.3" wide with 1.3" lip

Dining Style Fire Table

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 19:07:55 -0500

This large rectangle custom made fire table is made to use 6 standard patio chairs. What a great way to enjoy a meal or evening with friends as the 24" center burner flickers and the fireglass shimmers to provide plenty of warmth and ambience. Please call for custom sizing and pricing. Each of these tables are handmade to order. 1-866-601-8842

Coffee Table Style Fire Table

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 19:05:47 -0500

How would you like a custom made to order outdoor coffee table with the warmth and ambience of an open flame. These coffee table style fire tables are made to your specifications just for you. Give us a call at 866-601-8842 to order your one of a kind table.

Woodland Style 24" 5 Piece Log Set

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:36:58 -0500

5 Pc 24" Woodland Outdoor Log Set
Perfect for the 25" Fire Pit.
2 logs measuring 19 1/2" length
3 logs measuring 15 1/2" length

Woodland Style 17" 5 Piece Log Set

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:36:48 -0500

5 PC 17" Woodland Outdoor Log Set
Looks great on 19" or 25" Fire Pit.
2 logs measuring 13" length
2 logs measuring 12" length
1 log measuring 11" length

Woodland Style 17" 4 piece Log set

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:36:30 -0500

4 Pc 17" Woodland Log Set w/ Wood Bits
Perfect for the 19" Fire Pit.
1 log measuring 13" length
2 logs measuring 12" length
1 log measuring 11" length

Woodland Style 12" Log Set

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:36:17 -0500

FPL12W4 WOODLAND LOG SET
4 Piece 12" Woodland Log Set, Perfect for the 13" Fire Pit.
2 logs measuring 10" length
2 logs measuring 9" length

Campfire Style 4 Piece Log Set (Brown/Black)

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:36:04 -0500

4 PC 17 " Campfire Fiber Log Set w/wood bits; designed for use with 19" fire pits creates a natural appearance.

Woodland Style 24" 6 Piece Log Set

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 18:35:50 -0500

6 Pc Woodland Outdoor Log Set
This will work perfect for the 24" Fire Pit.
2 logs measureing 19 1/2" lenghth
4 logs measureing 15 1/2" lenghth.

Copper Round Fire-Water Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 17:00:43 -0500

This round copper fire-water bowl is perfect for adding fire to a water feature. The center bowl is designed to contain a fire ring and our fire module to create a breathtaking fire-water feature. This bowl is also available in a hand hammered copper and stainless steel in a variety of sizes. The water flow lip can extend in 1/4 pattern as pictured or to run over all of the outer edge. Please give us a call at 1-866-601-8842 for information on sizes and pricing.

Round Stainless Steel Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:40:44 -0500

Wok Series Concrete Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:25:43 -0500

The wok Series is our most popular concrete firebowl. It is a simple attractive bowl. It is available in may different colors and in a smooth or sandblasted finish. Available sizes:

WS2107- 21" x 7"
WS2709- 27" x 9"
WS3311- 33" x 11"
WS3913- 39" x 13"
WS4816- 48" x 16"
WS6020- 60" x 20"
WS7620- 76" x 20"

Oblique Series Square Concrete Fire Pot

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:24:11 -0500

The low profile design of the Oblique Series Fire Pots are great for ant outdoor decor. These Fire Pots are very popular on custom pedestals and along pool edges. The Oblique Series Fire Pot is featured in the header on the homepage of our website. Oblque series pots are available in many colors in a smooth or sandblasted finish. Available sizes:

OS1805- 18" x 5"
OS2407- 24" x 7"
OS3008- 30" x 8"
OS3610- 36" x 10"
OS4211- 42" x 11"
OS4813- 48" x 13"

Low Profile Wok Series fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:13:13 -0500

Lhe Low Profile Wok series is designed after the Wok Series but in a much lower profile. The bowls are cast concrete available in many different colors in a smooth or sandblasted finish. Sizes available:

LWS3006- 30" x 6"
LWS3607- 36" x 7"

Sonoma Series Concrete Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:02:18 -0500

The sonoma series bowls shown with and optional matching pedestal is an elegant bowl with great lines. They are available in many colors with a whitewash finish over a sandblasted color. Available in the following sizes:

SS1808- 18" x 8"
SS2410- 24" x 10"
SS3013- 30" x 13"
SS3615- 36" x 15"

Tuscany Series Concrete Fire Bowl

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 16:02:03 -0500

The Tuscany series bowls are a great bowl to add that look and feel of old world charm & architecture. These bowls are cast concrete and available in many different colors and come in a smooth or sandblasted finish. Available sizes:

TUS2410- 24" x 10"
TUS3013- 30" x 13"
TUS3615- 36" x 15"
TUS4720- 47" x 20"

30" Drop-In Manual Spark Ignition Fire Pit Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 13:51:42 -0500

This is the perfect drop-in fire pit kit for those of you that don't care to have a remote lit fire pit, but still want the safety of a thermocoupler to shut off the gas if the flame goes out.

Manual spark igniter (9V) and a Copreci pilotless valve (100K BTU). 30" Flat fire pan with 24" stainless steel fire ring

Simply push the 9-volt powered spark ignition switch, depress black knob for 30 seconds and enjoy a beautiful flame in your own backyard fire pit.

24" Drop-In Manual Spark Ignition Fire Pit Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 13:51:39 -0500

This is the perfect drop-in fire pit kit for those of you that don't care to have a remote lit fire pit, but still want the safety of a thermocoupler to shut off the gas if the flame goes out.

Manual spark igniter (9V) and a Copreci pilotless valve (100K BTU). 24" Flat fire pan with 18" stainless steel fire ring

Simply push the 9-volt powered spark ignition switch, depress black knob for 30 seconds and enjoy a beautiful flame in your own backyard fire pit.

18" Drop-In Manual Spark Ignition Fire Pit Kit

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Tue, 13 Oct 2009 13:51:37 -0500

This is the perfect drop-in fire pit kit for those of you that don't care to have a remote lit fire pit, but still want the safety of a thermocoupler to shut off the gas if the flame goes out.

Manual spark igniter (9V) and a Copreci pilotless valve (100K BTU). 18" Flat fire pan with 12" stainless steel fire ring

Simply push the 9-volt powered spark ignition switch, depress black knob for 30 seconds and enjoy a beautiful flame in your own backyard fire pit.

(Automated) Remote Control Copper Cone Head Tiki w/ Bamboo Pole

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 09 Oct 2009 18:19:02 -0500

(Automated) Remote Control Copper Cone-Style Tiki Torch with Bamboo Pole

Our Beautiful Automated Copper Tiki Torch will provide a soft, golden glow, enhancing any outdoor setting. With the push of a button from a wireless remote control you will instantly get the soothing, romantic light only an open flame tiki torch can provide. With a beautiful open flame and authentic bamboo pole these Automated Tiki Torches bring the look and feel of a Tropical Vacation.

The Automated Copper Cone-Style Tiki Torch includes: Fully Automated Tiki Head, an 84" Bamboo pole, transformer, and complete install instructions. The torch head and pole features a durable, yet lightweight all-steel construction and are powder-coated for a long lasting, durable finish. A flame-adjusting valve allows a wide variety of flame height and width.

Installation Instructions
for Automated Tiki Torch

Specifications
Torch Head Size: 7-3/4" W X 14" H
Pole Height: 84"
Total Height with Pole: 98"
Fuel: Liquid Propane Or Natural Gas
Materials: Powder-Coated Steel and Bamboo Pole

Please allow a minimum 36" of clearance on all sides of Tiki Torch.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour
Please note: Bamboo poles are non-returnable and will require onsite customization.

(Automated) Remote Control Black Cone Head Tiki with Bamboo Pole

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Fri, 09 Oct 2009 18:18:11 -0500

(Automated) Remote Control Black Cone-Style Tiki Torch with Bamboo Pole

Our Beautiful Automated Black Tiki Torch will provide a soft, golden glow, enhancing any outdoor setting. With the push of a button from a wireless remote control you will instantly get the soothing, romantic light only an open flame tiki torch can provide. With a beautiful open flame and authentic bamboo pole these Automated Tiki Torches bring the look and feel of a Tropical Vacation.

The Automated Black Cone-Style Tiki Torch includes: Fully Automated Tiki Head, an 84" Bamboo pole, transformer, and complete install instructions. The torch head and pole features a durable, yet lightweight all-steel construction and are powder-coated for a long lasting, durable finish. A flame-adjusting valve allows a wide variety of flame height and width.

Installation Instructions
for Automated Tiki Torch

Specifications
Torch Head Size: 9" W X 18" H
Pole Height: 84"
Total Height with Pole: 98"
Fuel: Liquid Propane Or Natural Gas
Materials: Powder-Coated Steel and Bamboo Pole

Please allow a minimum 36" of clearance on all sides of Tiki Torch.

LP Gas Usage
@ 49,000 BTU (max.) = .5 gallons/hour
@ 18,000 BTU (min.) = .2 gallons/hour

Natural Gas Usage
@ 49,000 BTU (max.) = 49 cubic feet/hour
@ 18,000 BTU (min.) = 18 cubic feet/hour
Please note: Bamboo poles are non-returnable and will require onsite customization.

Kona Torch Smooth Copper

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:27:18 -0500

This unique Kona torch will bring elegance to your backyard. Made of quality materials you will have many seasons of enjoyment. This holds 32 ounces of Citronella oil or Paraffin oil and delivers 20 hours of burning enjoyment. This also has a leak security in the event it should tip over. Placed on a pressure treated wooden pole you can now have the feel of a Polynesian tiki torch in your backyard.

Specifications
Torch Head Size: 6" W X 8-1/2" H
Pole Height: 53"
Total Height: 63-1/2"
Pole Diameter: 1"
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces
Materials: Copper Head & Pressured-Treated Wood Pole

Kona Nickel Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:25:16 -0500

The Kona Deluxe oil tiki torch has an adjustable wick that you can control with a dial and a separate oil fueling port. This holds 32 ounces of Citronella oil or Paraffin oil and will deliver 20 hours of burning enjoyment. Additionally you can use this with a pole and have that Polynesian tiki torch feeling with our pressure treated wooden pole.

Specifications
Torch Head Size: 6" w x 8-1/4" h
Pole Height: 53"
Total Height: 62"
Pole Diameter: 1"
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces

Kona Hammered Copper Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:24:23 -0500

The Kona torch is a addition that you will enjoy. Solid copper build with a � fiberglass wick. This also has a leak security in the event that it should tip over. This holds 32 ounces of citronella oil or Paraffin oil and delivers 20 hours of burning enjoyment.

Specifications
Torch Head Size: 6" W X 8-1/4" H
Pole Height: 53"
Total Height: 63-1/4"
Pole Diameter: 1"
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces
Materials: Copper Head & Pressured-Treated Wood Pole >

Kona Sconce Smooth Copper

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:23:21 -0500

Our unique Kona Sconce can be mounted directly to your wall to deliver that grand tiki torch effect that is sure to impress everyone. This is made of quality steel and powder coated to protect it from the environment. Oil tiki torches are one of the most important elements to enhancing your backyard.

Beautiful Wall-Mount Tiki Torch

Specifications
Torch Head Size: 6" w x 8-1/2" h
Pole Height: N/A
Total Height: See Photos
Pole Diameter: N/a
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces
Materials: Nickel Torch with Powder-Coated Sconcebr>

Kona Nickel Sconce

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:22:30 -0500

Beautiful Wall-Mount Tiki Torch

Kona Nickel Deluxe Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:21:28 -0500

Our Kona deluxe torch is constructed of quality materials to deliver you with lasting enjoyment. This product has a adjustable wick and a separate fuel port for easy filling. This will hold 32 ounce of Citronella oil or Paraffin oil and delivers 20 hours of burning enjoyment.

This can also be place on a pole to give you that authentic Polynesian tiki torch feel.

Specifications
Torch Head Size: 6" w x 9-3/4" h
Pole Height: 53"
Total Height: 62"
Pole Diameter: 1"
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces
.

Hammered Copper Kona Sconce

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:20:28 -0500

Our unique wall mounted Kona Sconce series oil tiki torch can be placed on your wall or you can use a pole either way this will deliver many night of enjoyment.

Constructed with quality steel and powder coated to protect from the environment you will be glad you have a few of these in your backyard and by the way you can also use this as a table center peice.

Wall Mount Tiki Torch

Specifications
Torch Head Size: 6" W X 8-1/2" H
Pole Height: N/A
Total Height: See photos
Pole Diameter: N/a
Wick Size: 1/2"
Preferred Fuel: Citronella Oil
Fuel Capacity: 32 Ounces
Materials: Copper & Powder-Coated Steel

Kona Deluxe Nickel Sconce

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:19:37 -0500

Our unique wall mounted Kona Sconce series oil tiki torch can be placed on your wall or you can use a pole either way this will deliver many nights of enjoyment.

Constructed with quality steel and powder coated to protect from the environment you will be glad you have a few of these in your backyard.

Kona Deluxe Hammered Copper Sconce

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 12:18:32 -0500

Our Kona series oil tiki torch mounts directly to your wall or you can use a pole, either way you display this unique torch it will deliver a setting that will impress everyone.

Made with quality steel and powder coated to protect from the elements you can count on this torch to deliver you with many nights of enjoyment.

Kona Deluxe Hammered Copper

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 10:46:48 -0500

When it comes to elegance and performance you will be very happy to have one of our unique designed hammered copper deluxe oil tiki torch. This is build with quality craftsmanship and has an adjustable wick control with a separate fuel port for easy filling.

This can hold up to 32 ounces of citronella oil or paraffin oil and delivers 20 hours of enjoyable flame.

This copper oil tiki torch also comes with a solid wood pole for your backyard the pole is 62�� tall installed.

Fiji Aluminum Gas Torch

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Thu, 28 May 2009 10:01:48 -0500

1/4" Yellow

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:42:40 -0500

�� Yellow Fireplace Glass comes form our Classic collection. Yellow Fireplace Glass is a great option if Gold Reflective is out of your design budget. Yellow is just the right shade of yellow. It�s not too bright and has a slight reflective side to it.

1/4" Turquoise

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:42:31 -0500

�� Turquoise Fire Pit Glass comes from our Accent Collection. Turquoise Fire Pit Glass is commonly used along with a color choice from our Premium Collection. Accent Fire Pit Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Teal

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:42:22 -0500

�� Teal Fireplace Glass comes from our Accent Collection. Teal Fireplace Glass is commonly used along with a color choice from our Premium Collection. Accent Fireplace Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Starfire

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:42:13 -0500

�� Starfire Fire Pit Glass comes from our Classic collection. Starfire fire Pit Glass is one of our top selling color choices. This may be due to the effect that this brilliant color causes. Starfire Fire Pit Glass looks like sparkling diamonds on fire or flames rising through ice.

1/4" Solex

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:42:02 -0500

�� Solex Fireplace Glass comes from our Classic Collection. Solex has a light green shade that is a medium between Clear and Evergreen. This color looks great in a room with light green walls.

1/4" Red

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:49 -0500

�� Red Fire Pit Glass comes from our Accent Collection. Red Fire Pit Glass is commonly used along with a color choice from our Premium Collection. Accent Fire Pit Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Purple

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:41 -0500

�� Purple Fireplace Glass comes from our Accent Collection. Purple Fireplace Glass is commonly used along with a color choice from our Premium Collection. Accent Fireplace Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Platinum

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:33 -0500

�� Platinum Fire Pit Glass comes form our Premium Collection. Platinum Fire Pit Glass will accent any back yard landscape. Platinum Fire Pit Glass is a Starfire color with a reflective mirror effect on one side. The reflective properties give off a brilliant sparkle in the mid day sun and catch the reflections of fire when burning after dark. Platinum Fire Pit Glass is exclusive to our Premium Collection.

1/4" Pink

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:24 -0500

�� Pink Fireplace Glass comes from our Accent Collection. Pink Fireplace Glass is commonly used along with a color choice from our Premium Collection. Accent Fireplace Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Pacific Blue Reflective

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:15 -0500

�� Pacific Blue Reflective Fireplace Glass is from our Premium Collection. Pacific blue Reflective is the best selling blue form our Premium Collection. This color looks great in any room�s d�cor. Pacific Blue Reflective is a dark blue with a reflective mirror effect on one side. The reflective properties give off a brilliant sparkle in the mid day sun and catch the reflections of fire when burning after dark.

1/4" Pacific Blue

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:41:07 -0500

�� Pacific Blue Fire Pit Glass comes from our Classic Collection. Pacific Blue Fire Pit glass is a common choice for use in a fire pit near a pool any body of water.

1/4" Moss Green

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:40:59 -0500

�� Moss Green Fireplace Glass comes from our Accent Collection. Moss Green Fireplace Glass is commonly used along with a color choice from our Premium Collection. Accent Fireplace Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.

1/4" Light Green

sales@outdoorfiredesigns.com (Outdoor Fire Designs) — Mon, 18 May 2009 23:40:50 -0500

�� Light Green Fire Pit Glass comes from our Accent Collection. Light Green Fire Pit Glass is commonly used along with a color choice from our Premium Collection. Accent Fire Pit Glass gets its exotic color from melting down clear glass and adding color dye to the batch. When the block of glass dries �� pieces are ground out. This is a custom process and the color shade will vary slightly from batch to batch.